PE/PP-R/PERT Pipe Extrusion Machine zhangjiagang sevenstars machinery co.,ltd , https://www.zjgsevenstarsmachinery.com
One person drives the night road. The opposite vehicle galloped and he politely converted the glare of the high beam into the low beam. But the other person ignored the gallop and the glare irritated his eyes. He was not happy. In the glare of white light, he ushered in the next high-visionist, and this time he was angry. When the two sides staggered, the other party's conscience found that both sides became low beams. It was a moment when both parties felt happy!
Many old drivers have said that the accident rate of driving at night is often higher than during the day, because the poor light at night, coupled with the impact of lights, the driver's slow response and so are the main factors causing the accident.
What should pay attention to driving at night?
Learn to use the dark traffic lights <br> <br> driving at night, the lights are essential aids. In use, not only should not be allowed to open the fog lamp and headlights together (if you do not even clear the switch fog lights, then still look at the user manual it), but also understand how to use and change the light.
During driving at night, if the speed of the vehicle is less than 30 km/h, a low beam light should be used. Under normal conditions, the light can be 30 meters away. When passing through the intersection, the speed should be decelerated at a distance of 50 to 100 meters from the intersection, and the high beam light should be turned into a low beam light. At the same time, the turn signal should be turned on to indicate the direction of travel.
Not go away Gray Black <br> <br> some older drivers often drive at night to say "do not go away Gray Black" and "not go away Gray white, black stop and see", in short, moonless night, the general road It is grayish black, and it is black outside the road surface; there are reflections in places where there is water, and darker places in potholes. In addition, the terrain can be judged according to the change of the front lighting pole. For example, if the light beam is shortened, it may be a corner or an uphill slope. The light beam may be longer or may be a downhill slope. There may be pits in the light beam that are notched on the road.
The traffic light is determined <br> <br> often encountered intersection night driving, according to road side vehicle illumination lights, the situation prediction with the other car. If the intersection has scattered light from the front vehicle's high beam, it can be judged that the car is still far away from the intersection. If the big light has a beam of light or there is a bright light on the corners of the corners of the intersection, be prepared for the trip.
According to the light of the remote car lights can also help us determine the road ahead. In good weather conditions, if the other party is a high beam headlights, and the distance is far and clear, it can be determined that the road ahead is flat. If the high beam light line suddenly disappears, it can be judged that there is an intersection or a bend in front; The high-beam light line swings to the left and right, and it can be judged that there is a curving road in front; if the high-beam light goes down, it can be judged that the slope is ahead.
In short, the most important night driving is to slow down. Second, it is necessary to focus on energy. Of course, you can't get up tonight or try not to catch the night.